Linear Stator Winding Machine ND-SLR01A

 

The automatic linear stator winding machine adopts needle winding technology with 3 needles, is used for open linear segmented stator coil winding machine, It is an improved coil winding making manufacturing technique, increase the performance of permanent magnet electrical machines and reduce cost, Segmenting the stator core offers the possibility to simplify the winding process, to increase slot fill factor or to minimize wastage of electrical steel. During winding, it can achieve multi-tapping (set on the HMI), wire damping, wire cutting.

The slot No. and turn No. can be set on HMI.

Automatic stator winding machine.jpg 

2. Application:

The stator winding machine suitable for BLDC motor stator manufacturing, a stator composed of similar stator segments and to a method for producing a stator from stator segments, wherein the stator segment comprises a laminated core that has a plastic layer which is arranged between the winding region of the stator winding and the laminated core for electrically insulating the winding region from the laminated core.


4. Linear stator winding machine Picture show

 The automatic linear stator winding machine adopt needle coil winding technology

segmented stator winding machine.jpg

The automatic segmented stator winding machine has 3 coil winding needles

 needle winding machine.jpg

The motor linear stator after coil winding

 linear stator winding machine.jpg



Comments

Post a Comment

Popular posts from this blog

how to run the BLDC Segment core motor stator coil winding machine

Image
The BLDC Segment core motor stator coil winding machine is suitable for winding the stator of 3-phase concentrated winding motor. I. Application range: 1. Wire dia≤Φ2.0mm，copper wire or aluminum wire； Stack height≤100mm； Core size（according to drawing）； 2. Suitable for winding copper wire and aluminum wire motor. 3. Each machine with a set of tooling. 4. Two ways of single winding and double layer winding can be realized by changing fixtures, accessories and equipment debugging. II. Features: 1. Servo motor control, the winding arrangement is neat and orderly, and the winding is according to the drawing. 2. Double axis double station, the distance between the double station axis is 400mm. III. Pass rate: 1. Production in this process meets the requirements of drawings and standards； 2. The defect rate of the winding process such as wire breakage and poor insulation after winding is less than 0.1%； IV. Cycle time: 1. Stator O.D 84mm，I.D 42mm，stack height Max60,copper wire dia 1...
Read more