Wheel Stator Winding Machine ND-R2SW01C

Product parameters

  • Product name：Wheel Hub Electric Stator Winding Machine ND-R2SW01C
  • Wheel motor Stator ID：10~100mm
  • Wheel motor Stator O.D：80-310mm
  • Wheel motor Stator stack lenght：10-50mm
  • Wire dia：0.2~1.3mm
  • Max. winding speed：500RPM
  • Winding station：2
  • Parallel winding wire number：1~8
  • Voltage：three pahse 380V 50HZ , single pahse 220V 50HZ
  • Air pressure：0.4-0.7 MPA
  • Total power：＜7KW
  • Weight：about 750KG
  • Dimension：1100x1000x1700mm

The wheel hub electric stator winding machine equips with the servo control system.

it is designed for Smart balance Electric Scooter wheel motor coil winding.

It could diagnose the fault, count the output, etc.

The other function such as auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be programmed.

The  wheel hub electric stator winding machine adopts double stations winding design.

It has high production efficiency and reduced labor costs.

The wheel hub electric stator winding machine has remote diagnostics function.

It is easy to operate and maintain .

Source of this article: Wheel Hub Electric Stator Winding Machine ND-R2SW01C

Comments

Post a Comment

Popular posts from this blog

how to run the BLDC Segment core motor stator coil winding machine

Image
The BLDC Segment core motor stator coil winding machine is suitable for winding the stator of 3-phase concentrated winding motor. I. Application range: 1. Wire dia≤Φ2.0mm，copper wire or aluminum wire； Stack height≤100mm； Core size（according to drawing）； 2. Suitable for winding copper wire and aluminum wire motor. 3. Each machine with a set of tooling. 4. Two ways of single winding and double layer winding can be realized by changing fixtures, accessories and equipment debugging. II. Features: 1. Servo motor control, the winding arrangement is neat and orderly, and the winding is according to the drawing. 2. Double axis double station, the distance between the double station axis is 400mm. III. Pass rate: 1. Production in this process meets the requirements of drawings and standards； 2. The defect rate of the winding process such as wire breakage and poor insulation after winding is less than 0.1%； IV. Cycle time: 1. Stator O.D 84mm，I.D 42mm，stack height Max60,copper wire dia 1...
Read more